Set switch vlanstatus – Allied Telesis AT-S39 User Manual

Page 127

Text mode
Original mode

AT-S39 Command Line Interface User’s Guide

127

SET SWITCH VLANSTATUS

Syntax

set switch vlanstatus=enabled|disabled

Parameters

vlanstatus

Specifies the switch’s mode. Specifying ENABLED

means the switch will support user-configured (port-
based and tagged) and multiple (801.Q compliant and
non-801.Q compliant) VLANs. Specifying DISABLED
means the switch will support the Basic switch mode.
The default is tagged and untagged VLANs. Only one
mode can be active on a switch at a time.

Description

This command configures a switch to support tagged VLAN switch
mode or the Basic switch mode.

Note
This command performs the same function as the command as SET
SWITCH SWITCHMODE on page 112.

Example

The following command configures the switch to support the Basic
switch mode:

set switch vlanstatus=disabled