beautypg.com

Destroy vlan – Allied Telesis AT-S39 User Manual

Page 125

background image

AT-S39 Command Line Interface User’s Guide

125

DESTROY VLAN

Note
This command is only allowed in user-configured VLANs mode. If
you use this command when in multiple VLAN mode, you will
receive the following message:

Operation NOT allowed in Multiple VLANs mode

Syntax

destroy vlan=name|vid

Parameter

vlan

Specifies the name or VID of the VLAN to be deleted.

Description

This command deletes a VLAN from a switch. All untagged ports in a
deleted VLAN are automatically returned to the Default_VLAN.

You cannot delete the Default_VLAN.

Examples

The following command deletes the VLAN Sales from the switch:

destroy vlan=sales

The following command deletes a VLAN with a VID of 2001 from the
switch:

destroy vlan=2001

See also other documents in the category Allied Telesis Computer hardware: