Set switch switchmode – Allied Telesis AT-S39 User Manual

Page 112

Text mode
Original mode

Chapter 13: VLAN Commands

112

SET SWITCH SWITCHMODE

Syntax

set switch switchmode=tagged|basic

Parameters

vlanmode

Specifies the switch’s mode. Specifying tagged means

the switch will support user-configured (port-based
and tagged) and multiple (801.Q compliant and non-
801.Q compliant) VLANs. Specifying basic means the
switch will support the Basic switch mode. The default
is basic. Only one mode can be active on a switch at a
time.

Description

This command configures a switch to support either port-based and
tagged VLANs or the Basic mode.

Note
This command performs exactly the same function as the SET
SWITCH VLANSTATUS command.

Example

The following command configures the switch to support the Basic
mode:

set switch switchmode=basic