Allied Telesis AT-VIEW PLUS 3.0 AMIGO - Manual (Page 8)

Allied Telesyn AT-VIEW PLUS
AMIGO
UserName
User account name to be used for accessing the MIB. This is required when using SNMPv3.
SecLevel
Security level that is configured for the User Name. This is required when using SNMPv3.
AuthProtocol
Authentication protocol that is configured for the User Name. This is required when using
SNMPv3.
AuthPassword
Authentication password that is configured for the User Name. This is required when using
SNMPv3.
PrivProtocol
Privacy protocol that is configured for the User Name. This is required when using SNMPv3.
PrivPassword
Privacy password that is configured for the User Name. This is required when using
SNMPv3.
xxx.amg file
The name of the AMIGO configuration file. This has the extension .amg.
Note - If a configuration file is specified along with the other parameters, the contents of the
configuration file will take precedence.
2.1.2 Target Host
The target host can be specified as a dotted IP address or as a host name.
Example:
Amigo -TargetHost 172.16.18.34 Amigo -TargetHost dvcmgrhub
2.1.3 SNMP Version
The Device Manager can use SNMPv1, SNMPv2c and SNMPv3. You may specify a value of 1, 2 or
3. If the SNMP Version is not specified, the default value of 1 (SNMPv1) will be used.
PN 613-50662-00 Rev A Page 8 of 43