Menus – Allied Telesis AT-VIEW PLUS 3.0 AMIGO User Manual

Page 22

Text mode
Original mode

Allied Telesyn

AT-VIEW PLUS

AMIGO

Note

- SNMPv3: Depending on the WRITE VIEW access settings of the User Account Name used,

there is a possibility that Amigo may not be able to set some MIB values. When this happens, a "No
access error." value will be displayed on the affected MIB Value cells.

Note

- SNMPv3: When a Set operation is performed using a user account that has No Read access

but has Write access to the target MIB variable, the error message, "No access error." is displayed
but the new value is still saved on the device.

3 Main Window

PN 613-50662-00 Rev A

Page 22 of 43