2 get values and next to, 3 set values, 2 get values and next to 4.4.3 set values – Allied Telesis AT-VIEW PLUS 3.0 AMIGO User Manual

Page 41: Get values and next to, Set values

Text mode
Original mode

Allied Telesyn

AT-VIEW PLUS

AMIGO

Get SNMP values of selected device

Note

- If you select a node containing many variables, for instance the whole mib-2 subtree, it might

take a while to get all the values of these variables values.

4.4.2 Get Values and Next To

Gets MIB values for the variable or node selected in the MIB tree, then select the next variable or
node. This is useful when you want to get MIB values continuously.

4.4.3 Set Values

PN 613-50662-00 Rev A

Page 41 of 43