Allied Telesis AT-VIEW PLUS 3.0 AMIGO - Manual (Page 21)

Allied Telesyn AT-VIEW PLUS
AMIGO
To change the value, check the variables to be changed before clicking the Set MIB Value button.
AMIGO will send the checked values in a batch.
3.3.2 MIB Variable Column
The second column shows the name of the variable.
3.3.3 MIB Value Column
The third column shows the value of the variable. If the variable has write-access, you can input the
value to be set in this column. If the variable takes a value from a fixed set of values, this column is a
drop-down listbox. To change the variable value, input or select the value to set/change, check the
boxes for the variables to change, then click the Set MIB Value button.
Data displayed in the MIB Value column is not automatically updated. To see the latest value, click
the Get MIB Value button again.
Note - To put into effect values entered in the MIB Value column, press the Enter key or move the
cursor to another column.
Note - SNMPv3: Depending on the READ VIEW access settings of the User Account Name used,
there is a possibility that Amigo may not be able to access some MIB values. When this happens, the
values for the affected MIB variables will be blank.
3.3.4 Select All Button
: checks all variables.
3.3.5 Clear Button
: unchecks all variables.
3.3.6 Reverse Button
: flips the states of all checkboxes, that is, unchecks all variables currently selected and checks all
variables currently not selected.
3.3.7 Get MIB Value Button
: gets the value of the variable selected in the MIB Variable column.
3.3.8 Set MIB Value Button
: sets values in the MIB Value column for the variables checked in the checkbox column.
PN 613-50662-00 Rev A Page 21 of 43