Allied Telesis AT-VIEW PLUS 3.0 AMIGO - Manual (Page 10)

Allied Telesyn AT-VIEW PLUS
AMIGO
2.1.7 Security Level
If you specified 3 (SNMPv3) for the SNMP Version, you must also specify a Security Level that is
configured for the User Account Name on the target host. The available Security Levels are
noAuthNoPriv, authNoPriv, and authPriv.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP
-SecLevel noAuthNoPriv
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP1
-SecLevel authNoPriv -AuthProtocol SHA -AuthPassword PASS1233
2.1.8 Authentication Protocol
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is authNoPriv or
authPriv, then you must specify an Authentication Protocol that is configured for the User Account
Name on the target host. The available Authentication Protocols are MD5 and SHA.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP
-SecLevel authNoPriv -AuthProtocol MD5 -AuthPassword PASS1234
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP1
-SecLevel authNoPriv -AuthProtocol SHA -AuthPassword PASS1233
2.1.9 Authentication Password
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is authNoPriv or
authPriv, then you must specify an Authentication Password that is configured for the User Account
Name on the target host.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP
-SecLevel authNoPriv -AuthProtocol MD5 -AuthPassword PASS1234
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP1
-SecLevel authNoPriv -AuthProtocol SHA -AuthPassword PASS1233
PN 613-50662-00 Rev A Page 10 of 43