beautypg.com

1 snmp v1 / v2c settings – Allied Telesis AT-VIEW PLUS 3.0 AMIGO User Manual

Page 27

background image

Allied Telesyn

AT-VIEW PLUS

AMIGO

SNMP version

The version of SNMP that the device will use to send and receive device information. After
choosing the version of SNMP to use, click on the Settings button to specify the SNMP
parameters that correspond with the chosen version. If the SNMP version is set to "v1" or
"v2c", then the SNMP v1/v2c Settings dialog box will be displayed. Otherwise, if the SNMP
version is set to "v3", then the SNMP v3 Settings dialog box will be displayed.

Target Host Property dialog box

4.1.6.3.1 SNMP v1 / v2c Settings

Community for read/Community for write

The community strings used to perform SNMP operations on the device.

SNMP v1/v2c Settings dialog box

PN 613-50662-00 Rev A

Page 27 of 43

See also other documents in the category Allied Telesis Computer hardware: