Allied Telesis AT-VIEW PLUS 3.0 AMIGO - Manual (Page 11)

Allied Telesyn AT-VIEW PLUS
AMIGO
2.1.10 Privacy Protocol
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is authPriv, then you
must specify a Privacy Protocol that is configured for the User Account Name on the target host. The
available Privacy Protocol is DES.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP
-SecLevel authPriv -AuthProtocol MD5 -AuthPassword PASS1234
-PrivProtocol DES -PrivPassword PASS5678
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP1
-SecLevel authPriv -AuthProtocol SHA -AuthPassword PASS1236
-PrivProtocol DES -PrivPassword PASS5675
2.1.11 Privacy Password
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is authPriv, then you
must specify a Privacy Password that is configured for the User Account Name on the target host.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP
-SecLevel authPriv -AuthProtocol MD5 -AuthPassword PASS1234
-PrivProtocol DES -PrivPassword PASS5678
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName ATVP1
-SecLevel authPriv -AuthProtocol SHA -AuthPassword PASS1236
-PrivProtocol DES -PrivPassword PASS5675
2.1.12 Configuration File
The configuration file is created by selecting File > Save As. It contains the environment settings for
AMIGO.
Example:
Amigo test.amg
2.1.13 Parameter File
PN 613-50662-00 Rev A Page 11 of 43