Allied Telesis AT-WCU201G - Manual (Page 58)

Chapter 3: Microsoft Windows XP
58
Setting the IP Address
To set the IP address of the adapter or to activate the DHCP client,
perform the following procedure:
1. Open the Control Panel.
2. Double-click on Network Connections.
An example of the Network Connections window is shown in Figure
34.
Figure 34. Network Connections Window
3. Right-click on the Wireless Network Connection icon of the wireless
adapter and select Properties from the pull-down menu, as shown in
Figure 35.
Figure 35. Wireless Network Connection Pull-down Menu