Allied Telesis AT-WCU201G - Manual (Page 55)

AT-WCU201G Wireless Adapter Card Installation Guide
55
Selecting the
Active Profile
Group
This procedure selects the active profile group for an adapter. The switch
uses the profiles in the active group to establish a connection to a wireless
network. There can be only one active group at a time for a wireless
adapter. The active group is designated with the icon in Figure 31 on page
52.
To select the active profile group, perform the following procedure:
1. Start the configuration program by clicking the program’s icon, shown
in Figure 23 on page 35, located in the toolbar on the desktop.
The main window of the configuration utility is shown in Figure 24 on
page 35.
2. In the Profile Group Control section of the Configuration tab, click the
group to be designated as the active group and click Select.
Alternatively, double-click the group. The selected group is designated
with the symbol in Figure 31 on page 52.
The profiles stored in the selected group are now active. The wireless
adapter will attempt to establish a connection to a wireless network
using the profiles in the active group.