Allied Telesis AT-WCU201G - Manual (Page 48)

Chapter 2: Using the Adapter’s Configuration Utility
48
Deleting a Preferred WLAN Profile
To delete a Preferred WLAN profile, perform the following procedure:
1. Start the configuration program by clicking the program’s icon, shown
in Figure 23 on page 35, located in the toolbar on the desktop.
The main window of the configuration utility is shown in Figure 24 on
page 35.
Note
Perform step 2 if you created profile groups, which are optional. For
further information, refer to “Working with Profile Groups” on
page 52
2. In the Profile Group Control section of the Configuration tab, click the
group containing the profile to be deleted.
3. In the Preferred WLANs section of the Configuration tab, click the
Preferred WLAN you want to delete.
4. Click Remove.
The selected Preferred WLAN is deleted from the Wireless Adapter
Configuration Utility.
5. Click Apply.
6. If you are finished using the configuration utility, click OK.