Allied Telesis AT-WCU201G - Manual (Page 17)

AT-WCU201G Wireless Adapter Card Installation Guide
17
Installing the Adapter Driver
To install the adapter driver, perform the following procedure:
1. Power ON the computer.
2. Insert the Software and Documentation CD into the CD drive of the
computer.
Note
If your computer launches the web browser when you insert the CD,
minimize or close the web browser window.
3. Remove the cap from the AT-WCU201G wireless adapter, as shown in
Figure 2.
Figure 2. Removing the Cap from the AT-WCU201G Wireless Adapter
4. Connect one end of the USB cable included with the adapter to a USB
port on your computer. For best performance, the port should be a
USB 2.0 port. The adapter will work if connected to a USB 1.1 port, but
at a reduced speed.
AT
-WCU201
G
Wir
eless USB 2.
0
Act
Link
Act
Lin
k
768