Allied Telesis AT-S63 - Manual (Page 613)

AT-S63 Management Software Command Line User’s Guide
Section II: Advanced Operations 613
DESTROY VRRP
Syntax
destroy vrrp=[ vrid |all]
Parameters
vrrp Specifies the ID of the virtual router. The options are:
vrid Specifies the ID of a single virtual router,
a number between 1 and 255.
all Specifies that the switch be removed
from all the virtual routers in which it
participates.
Note
To destroy a virtual router completely on the LAN, you must destroy
it on all the switches participating in it.
Description
This command removes the switch from the group that forms the specified
VRRP virtual router.
Example
This command stops the switch from participating in virtual router 32:
destroy vrrp=32