Allied Telesis AT-S63 - Manual (Page 518)

Chapter 29: Port-based, Tagged, and Multiple Mode VLAN Commands
518 Section VI: Virtual LANs
The information displayed by the command is described here:
ˆ VLAN name - The name of the VLAN. The name is Client_VLAN
followed by the port number.
ˆ VLAN ID - The ID number assigned to the VLAN.
ˆ VLAN Type - The type of VLAN. This will be Port Based for the VLANs
of a multiple VLAN mode.
ˆ Protected Ports - The status of protected ports. Since the VLANs of a
multiple VLAN mode are not protected ports VLANs, this will be No.
ˆ Untagged port(s) - The untagged port of the VLAN.
ˆ Tagged port(s) - The tagged port that is functioning as the uplink port
for the VLANs.
For an example of the information displayed by this command for a
protected ports VLAN, see Figure 45 on page 541. For an example of a
MAC address-based VLAN, see Figure 46 on page 551.
Examples
The following command displays all the VLANs on the switch:
show vlan
The following command displays information on just the Sales VLAN:
show vlan=sales
The following command displays information for the VLAN with the VID of
22:
show vlan=22