beautypg.com

Allied Telesis AT-S63 User Manual

Page 579

background image

AT-S63 Management Software Command Line User’s Guide

Section VII: Internet Protocol Routing

579

This command changes RIP on the VLAN11-0 interface to accept both
RIP version 1 and version 2 packets:

set ip rip interface=vlan11-0

receive=both

This command changes RIP on the VLAN22-1 interface to send and
receive RIP version 1 packets. Since version 1 does not support password
authentication, the command disables it:

set ip rip interface=vlan22-1

send=rip1 receive=rip1

authentication=none

Note

Password authentication must be disabled to change an interface
from RIP version 2 to version 1.

See also other documents in the category Allied Telesis Computer hardware: