Allied Telesis AT-S87 - Manual (Page 54)

Chapter 5: Port Trunking
54
Modifying a Trunk
To modify a port trunk, perform the following procedure:
1. From the main menu, select Bridge > Trunking.
The Trunking page is shown in Figure 15 on page 52.
2. In the Show Trunk list, select the trunk you want to modify.
3. Click OK.
The display is refreshed to show the trunk name you selected.
4. Select or de-select the ports you want to include in the trunk by clicking
the port icon in the graphic image of the switch front.
A check mark is placed for each port you select, as for example Figure
16 on page 52.
5. Do one of the following:
ˆ Click OK to save the trunk.
ˆ Click Reload to clear the changes and start over.
6. To permanently save these settings in the configuration file, from the
main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 21.
7. Click Save.