Allied Telesis AT-S87 - Manual (Page 25)

AT-S87 Management Software User’s Guide
25
Note
Be careful not to delete all the users. You should have at least one
user, with a password, to manage the switch.
4. Click OK.
5. To permanently save these settings in the configuration file, from the
main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 21.
6. Click Save.
Enabling or
Disabling
Password
Protection
To enable or disable password protection (authentication) for the users,
perform the following procedure:
1. From the main menu, select System > Administration.
The Administration page is shown in Figure 4 on page 23.
Note
Allied Telesis recommends that you keep password protection
enabled to protect the switch from unauthorized changes.
2. In the Password Protection list, select one of the following:
Enabled
To enable the feature.
Disabled
To disable password protection. This is the default.
3. Click OK.
4. To permanently save these settings in the configuration file, from the
main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 21.
5. Click Save.