Allied Telesis AT-S87 - Manual (Page 16)

Chapter 1: Getting Started
16
Starting a Management Session
To start a management session on the switch, perform the following
procedure:
1. In a web browser address box, enter the following IP address:
192.168.1.1
The main page for the AT-S87 management software is shown in
Figure 1.
Figure 1. Main Page
Note
Because the switch initially has no login or password protection,
Allied Telesis strongly suggests that you immediately do two things:
Change the IP address, as described in “Configuring the IP Address,
Subnet Mask, and Gateway Address” on page 20.
Add an administrative user and password who can access the
switch, as described in “Adding an Administrative User” on page 23.