Allied Telesis AT-S87 - Manual (Page 108)

Chapter 10: STP and RSTP
108
Auto
The switch automatically detects if the port is functioning as a point-to-
point port.
Yes
Sets the port to always function as a point-to-point port.
No
Sets the port to never function as a point-to-point port.
7. Click Modify.
8. Do one of the following:
ˆ Click OK to save the changes.
ˆ Click Reload to restore the previous settings.
9. To permanently save these settings in the configuration file, from the
main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 21.
10. Click Save.