Allied Telesis AT-2912T - Manual (Page 47)

AT-2712FX/SC and AT-2912T Secure Ethernet Network Adapter Installation and User’s Guide
47
Updating the
Adapter Software
This section provides a procedure for updating the adapter software for the
Windows Server 2003 or Windows XP systems.
Note
You must have Administrator privileges to update the driver
software.
When you update the adapter software on existing devices, the Advanced
Property settings may not be updated unless you remove the existing
device by following the instructions in “Uninstalling the Driver Software” on
page 63. Then you must perform a scan for hardware changes in the
device manager, followed by reinstalling the device with the current
adapter software as described in “Installing the Driver Software” on
page 46.
Caution
Before uninstalling a device, capture all of the Advanced Property
settings because the properties will be lost.
Updating the Windows 2003 Server or Windows XP Driver Software
To update the adapter software on a Windows Server 2003 or a Windows
XP system, perform the following procedure.
Note
Update all adapters by repeating the following steps on each device.
1. Start either a Windows Server 2003 system or a Windows XP system
and log in.
You must have Administrator privileges to update the driver software.
2. On the desktop, right click My Computer.
The My Computer window opens.
3. Select Properties from the menu.