Allied Telesis AT-WNP300N - Manual (Page 20)

20 AT-WNP300N - IEEE802.11b/g/n 1T2R Wireless Fast PCI adapter - User Manual
Chapter 4: Configure Wireless Network
You can configure your wireless network by AT-WNP300N Wireless Utility in Windows Xp, Vista, and
2000. Before the configuration, please confirm that the wireless adapter is within the range of wireless AP.
Weak signal might result in connection failure.
Run AT-WNP300N Wireless Utility
After installing AT-WNP300N Wireless Utility on your computer, AT-WNP300N IEEE802.11b/g/n 1T2R
Wireless Fast PCI adapter will automatically search and connect to a open wireless network nearby. Please
double click on icon at the tray to open AT-WNP300N Wireless Utility.
Note: If you do not see the icon at the tray, go to “Start” “All Programs”
“AT-WNP300N” and click on “AT-WNP300N Wireless Utility” to open it.
The First View of AT-WNP300N Wireless Utility
Figure 17: The First View of AT-WNP300N Wireless Utility
Main Menu To configure the wireless adapter. Please refer to Chapter 5: Utility
Introduction for the details
Configuration It shows main part of configuration
See more/less Switch to see more or less information
Connection Status It shows current connection status
Start Wireless Network Connection
This session describes the procedure of connecting to a wireless AP. You need to configure AT-WNP300N
IEEE802.11b/g/n 1T2R Wireless Fast PCI adapter in accordance with the wireless AP’s encryption setting.