Allied Telesis AT-2716POE - Manual (Page 85)

AT-2716POE Fast Ethernet Fiber & PoE Adapter Installation and User’s Guide
85
10/100/1000Base-T Twisted-Pair Port Connectors
This section lists the pin signals for the 10/100/1000Base-T twisted-pair
ports for the AT-2716POE adapter. Figure 43 illustrates the pin layout to
an RJ-45 connector and port.
Figure 43. RJ-45 Connector and Port Pin Layout
Table 5 lists the RJ-45 pin signals when a twisted-pair port is operating in
the MDI configuration.
Table 5. MDI Pin Signals (10Base-T or 100Base-TX)
Pin Signal
1 TX+
2 TX-
3 RX+
6 RX-
Table 6 lists the RJ-45 port pin signals when a twisted-pair port is
operating in the MDI-X configuration.
Table 6. MDI-X Pin Signals (10Base-T or 100Base-TX)
Pin Signal
1 RX+
2 RX-
3 TX+
4 TX-
Table 7 lists the RJ-45 connector pin and their signals when a 1000Base-
T port is operating at 1000 Mbps.
Table 7. RJ-45 1000Base-T Connector Pinouts
Pin Pair Signal
1 1 TX and RX+
2 1 TX and RX-
3 2 TX and RX+