Allied Telesis AT-2716POE - Manual (Page 38)

AT-2716POE Fast Ethernet Fiber & PoE Adapter Installation and User’s Guide
38
Uninstalling the Driver Software
Caution
Before uninstalling the Allied Telesis device, be sure to capture all
Advanced Property settings because the properties are lost during
the uninstall process.
To uninstall the adapter software from your system, perform the following
procedure:
1. Start your Windows XP system and log in.
Note
You must have Administrator privileges to remove the driver
software.
2. Right click on My Computer and then select Properties from the
menu.
The Device Manager Window opens. It is shown in Figure 13 on
page 35.
3. In the Device Manager window, click the + next to the Network
adapters folder.
The selection expands to show the list of installed network adapter
cards.
4. Right-click on the adapter to be removed and select Uninstall. A
Confirm Device Removal window opens.
5. Click OK to complete the uninstall.
Note
Not all of the driver files are removed as part of this procedure.