Allied Telesis AT-2716POE - Manual (Page 44)

AT-2716POE Fast Ethernet Fiber & PoE Adapter Installation and User’s Guide
44
Uninstalling the Driver Software
Before physically removing an adapter from your system, you need to
uninstall the driver software first. The procedure in this section describes
how to uninstall the driver software.
Note
You must have Administrator privileges to remove the driver
software.
Caution
Before uninstalling the Allied Telesis device, be sure to capture all
of the Advanced Property settings because the properties are lost
during the uninstall process.
To uninstall the driver software from your system, do the following:
1. Start a Windows Vista or Windows 7 Operating System on your
system and log in.
2. Open the Device Manager.
For specific instructions on how to open the Device Manager, see the
following:
 To open the Device Manager in the Windows 7 Operating System,
follow steps 3 and 4.
 To open the Device Manager in the Windows Vista Operating
System, follow steps 5 through 7.