beautypg.com

Allied Telesis AT-2716POE User Manual

Page 72

background image

AT-2716POE Fast Ethernet Fiber & PoE Adapter Installation and User’s Guide

72

Updating the Large

Send Offload v2

(IPv4)

The “Large Send Offload v2 (IPv4)” property allows for configuring LSO
using version 2 of the IPv4 protocol.

1. In Microsoft Windows, right-click the Network Adapter in

Network Connections and then click Properties.

2. Click the Configure button and then the Advanced tab.
3. Set the "Large Send Offload v2 (IPv4)" parameter to Disable or

Enable.


The default setting is Enable.

Updating the Large

Send Offload v2

(IPv6) property

The “Large Send Offload v2 (IPv6)” property allows for configuring LSO
using version 2 of the IPv6 protocol.

1. In Microsoft Windows, right-click the Network Adapter in

Network Connections and then click Properties.

2. Click the Configure button and then the Advanced tab.
3. Set the "Large Send Offload v2 (IPv6)" parameter to Disable or

Enable.


The default setting is Enable.

Updating the Network

Address property

The “Network Address” property is a user-defined address that is used
in place of the MAC address that was originally assigned to the adapter.
Every adapter in the network must have its own unique MAC address.
This locally administered address consists of a 12-digit hexadecimal
number.

1. In Microsoft Windows, right-click the Network Adapter in

Network Connections and then click Properties.

2. Click the Configure button and then the Advanced tab.
3. Configure the "Network Address" parameter by assigning a

unique node address for the adapter.


The default setting is Not Present.

Updating the NS

Offload property

The “NS offload” property sets the ability of the network adapter to
respond to a Neighbor Discovery Neighbor Solicitation request with a
Neighbor Advertisement without waking the computer.

1. In Microsoft Windows, right-click the Network Adapter in

Network Connections and then click Properties.

2. Click the Configure button and then the Advanced tab.
3. Set the "NS Offload" parameter to Disable or Enable.


The default setting is Enable.

Updating the Priority

& VLAN property

The “Priority & VLAN” property enables or disables the priority and
VLAN tagging functions of the device.