Epson 1200S - Manual (Page 93)

86
If your scanned image is faint or
has gaps . . .
■
Check the brightness. Decrease
the software or driver’s brightness
setting.
■
Try adjusting the Gamma setting.
■
Check the condition of your
original. If the document is
damaged, dirty, or wrinkled,
these imperfections will show up
in your scan.
■
Check that the document is
placed flush against the document
table.
If your scanned image is blurred
or distorted . . .
■
Check the position and condition
of your document. Make sure the
document is placed flat against
the scanner’s document table
glass. If only part of the image is
blurred, part of your document
may be wrinkled or warped.
■
Make sure the document table
glass is clean.
■
Make sure the scanner is not
tilted or placed on an unstable or
uneven surface.