Epson 1200S - Manual (Page 25)

18
5. When the Scanner Software Installation screen appears, click Install Mac SCSI
Drivers .
6. Click Yes when asked if you want to restart your computer when the installation
is finished.
7. When the Adaptec Installer window appears,
select the hard drive where you want to install
the driver (your startup hard drive is selected by
default) and click Install .
8. If the installer prompts you to restart
your computer, click Restart or
Continue to let it perform the restart.
Once the SCSI card and its software are installed on your computer, you can install
your scanning software, following the instructions in “Install the Scanner Software,”
on page 19.
click here