Epson 1200S - Manual (Page 78)

71
Loading 4 x 5 inch Film
Insert film in the 4
× 5 inch film holder, base side facing
down.
Then place the film holder on the document
table. Be sure to align the upper left corner of
the film holder with the upper left corner of
the transparency unit.
Loading Slides and Film Directly on the Document Table
Hold the film by the edges or use gloves. Touching the film
surface with bare hands can leave fingerprints or other marks
on the film.
You can scan slides and film strips in the 4 × 5-inch (101.6 × 127 mm) scanning area
of the transparency unit. You can use film holders (as described in the previous
sections) or place them directly on the document table. Follow the steps below.
1. Open the top of the transparency unit while holding the base down.