Epson 1200S - Manual (Page 24)

17
6. In the Manufacturers list, click Adaptec .
7. In the SCSI Adapter list, click Adaptec
AHA-294X/AHA-394X or AIC-78XX PCI SCSI
Controller .
8. Click OK . If you see a prompt to install the
Windows NT CD-ROM, insert it and click
OK .
9. The necessary driver files are copied to your hard drive, then you see a prompt to
restart your system.
10. Click Yes . Be sure to close any open windows and restart.
Once the SCSI card and its software are installed on your computer, you can install
your scanning software, following the instructions in “Install the Scanner Software”
on page 19.
Installing the SCSI Driver Software for the
Macintosh
Installing the SCSI driver software is easy—just follow the steps listed below:
1. Turn on your computer. Disable any anti-virus programs.
2. Insert the Macintosh EPSON Perfection 1200 CD-ROM in your
drive.
3. If the EPSON window does not automatically open, double-click the
EPSON CD-ROM icon on your desktop.
4. Double-click the EPSON icon in the EPSON Window.