Epson 1200S - Manual (Page 70)

63
Transporting the Scanner
When you transport the scanner a long
distance or store it for an extended time,
follow the steps below to secure the carriage.
1. Remove any optional equipment and
replace the document cover.
2. Turn on the scanner and wait until the
carriage moves to the home position
(toward the back of the scanner). Then
turn off the scanner.
If the carriage does not automatically return to the home
position, slowly raise the front of the scanner and hold it up
until the carriage comes to rest in the home position. Then
turn the transportation lock to the locked position.
If you are using the transparency unit and it is switched on,
the carriage will not move to the home position. Remove the
transparency unit first, then perform the steps above.
3. Use a coin or screwdriver to turn the
transportation lock to the locked
position (toward the top of the
scanner).
home position