Epson 1200S - Manual (Page 30)

23
You don’t need to change the screen calibration again so long
as you continue to use the same monitor. If you don’t see the
utility or if you need to recalibrate your screen at a later time,
click EPSON TWAIN 4 in the Control Panel (click Start >
Settings > Control Panel > EPSON TWAIN 4 from the
Windows Desktop to access it). On the EPSON TWAIN 4
dialog box, click the Calibration button.
In the following window, move the slider to the right or left until the shades of the
horizontal gray stripes appear similar. View the screen from a short distance. The
gray stripes will not perfectly blend together; however, try to make the two tones
match as closely as possible.
7. Click OK to register the calibration setting.
8. The Setup completion dialog box appears. Click OK .
9. Now you can install your creative software and view your electronic manuals as
described on page 26.
If You’re Using a Macintosh . . .
If you are using Mac OS 8.1, you need to install the Macintosh
Update before installing the scanner software. This is available
online from the Apple web site. If you are using Mac OS 8.5 or
later, check the Apple web site for any updates.
1. Turn on your scanner first. Then turn on your Macintosh and turn off any virus
protection programs.
before calibration after calibration