Epson 1200S - Manual (Page 14)

7
Setting Up Your Scanner
Setting up your scanner is easy—just follow the simple steps in this book in the order
listed below.
1. Unpack and choose a place for your scanner.
2. Install the SCSI interface board, if necessary.
3. Unlock the scanner.
4. Set the SCSI ID number.
5. Connect the scanner to your computer.
6. Power on your system.
7. Install the SCSI software.
8. Install the scanner software.
9. Install the creative software and view your electronic manuals.
If you purchased the optional transparency unit or auto document feeder, see “Using
the Optional Equipment” on page 67 for installation instructions.
Unpack Your
Scanner
Remove the scanner from the
box, then remove the packing
material from your scanner.
Save the packaging in case you
need it later. Your EPSON
Perfection 1200S comes with
the items shown here.
scanner
CD-ROM with driver,
electronic manuals,
and creative software
for Windows
SCSI
interface
cable
CD-ROM with driver,
electronic manuals,
and creative software
for Macintosh
Scanner Basics
SCSI
interface
board