Epson 1200S - Manual (Page 81)

74
Unpacking the Auto
Document Feeder
When you unpack your auto document feeder
(ADF), make sure you have all the parts shown
to the right. Remove the protective materials
from the ADF. Keep all the packing materials
so you can use them for storage when you are
using the auto document feeder. If any items
are missing or damaged, contact your EPSON
dealer.
Installing the Auto Document Feeder
1. Make sure your scanner is turned off.
2. Remove the document cover from the scanner by opening it to an upright
position, and lifting it straight up.
3. Make sure the document table is clean and dust free.
4. Insert the hinges on the ADF into the
outer square holes at the back of the
scanner and close the ADF.
5. Attach the ADF’s connector (arrow faces
up) to the scanner’s option interface.
paper support
auto document feeder
spare paper path guide