AMX Modero CV7 - Manual (Page 163)

Programming
151 7" Modero Touch Panels
"^" Button Commands (Cont.)
^BML
Set the maximum
length of the text
area button.
If this value is set to zero (0) there is no max length. The maximum length available is
2000. This is only for a Text area input button and not for a Text area input masking button.
Syntax:
"'^BML-,'"
Variable:
variable text address range = 1 - 4000.
max length = 2000 (0=no max length).
Example:
SEND_COMMAND Panel,"'^BML-500,20'"
Sets the maximum length of the text area input button to 20 characters.
^BMP
Assign a picture to
those buttons with
a defined address
range.
Syntax:
"'^BMP-,,picture>'"Variable: variable text address range = 1 - 4000.button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).name of bitmap/picture = 1 - 50 ASCII characters.Example:SEND_COMMAND Panel,"'^BMP-500.504&510.515,1,bitmap.png'"Sets the OFF state picture for the buttons with variable text ranges of 500-504 & 510-515.^BNCClear current
TakeNote
annotations.Syntax: "'^BNC-,'"Variable: variable text address range = 1 - 4000.command value = (0= clear, 1= clear all).Example:SEND_COMMAND Panel,"'^BNC-973,0'"Clears the annotation of the TakeNote button with variable text 973.^BNNSet the TakeNote
network name for
the specified
Addresses.Syntax: "'^BNN-,'"Variable: variable text address range = 1 - 4000.network name = Use a valid IP Address.Example:SEND_COMMAND Panel,"'^BNN-973,192.168.169.99'"Sets the TakeNote button network name to 192.168.169.99.^BNTSet the TakeNote
network port for
the specified
Addresses.Syntax: "'^BNT-,'"Variable: variable text address range = 1 - 4000.network port = 1 - 65535.Example:SEND_COMMAND Panel,"'^BNT-973,5000'"Sets the TakeNote button network port to 5000."^" Button Commands (Cont.)
picture>'"
Variable:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
name of bitmap/picture = 1 - 50 ASCII characters.
Example:
SEND_COMMAND Panel,"'^BMP-500.504&510.515,1,bitmap.png'"
Sets the OFF state picture for the buttons with variable text ranges of 500-504 & 510-515.
^BNC
Clear current
TakeNote
annotations.
Syntax:
"'^BNC-,'"
Variable:
variable text address range = 1 - 4000.
command value = (0= clear, 1= clear all).
Example:
SEND_COMMAND Panel,"'^BNC-973,0'"
Clears the annotation of the TakeNote button with variable text 973.
^BNN
Set the TakeNote
network name for
the specified
Addresses.
Syntax:
"'^BNN-,'"
Variable:
variable text address range = 1 - 4000.
network name = Use a valid IP Address.
Example:
SEND_COMMAND Panel,"'^BNN-973,192.168.169.99'"
Sets the TakeNote button network name to 192.168.169.99.
^BNT
Set the TakeNote
network port for
the specified
Addresses.
Syntax:
"'^BNT-,'"
Variable:
variable text address range = 1 - 4000.
network port = 1 - 65535.
Example:
SEND_COMMAND Panel,"'^BNT-973,5000'"
Sets the TakeNote button network port to 5000.
"^" Button Commands (Cont.)