AMX Modero CV7 - Manual (Page 162)

Programming
150 7" Modero Touch Panels
"^" Button Commands (Cont.)
^BMF (Cont.) ’%GI’ = Set the bargraph invert/noninvert or joystick coordinate
(0,1,2,3). See the ^GIV command on page 156 for more information.
’%GU’ = Set the bargraph ramp up time in intervals of 1/10 second.
’%GD’ = Set the bargraph ramp down time in 1/10 second.
’%GG = Set the bargraph drag increment. Refer to the ^GDI
command on page 156 for more information.
’%VI’ = Set the Video either ON (value=1) or OFF (value=0).
’%OT’ = Set the Feedback (Output) Type to one of the following:
None, Channel,Invert, ON (Always ON), Momentary, or Blink.
’%SM’ = Submit a text for text area button.
’%SF<1 or 0>’ = Set the focus for text area button.
’%OP<0-255>’ = Set the button opacity to either Invisible (value=0) or Opaque
(value=255).
’%OP#<00-FF>’ = Set the button opacity to either Invisible (value=00) or Opaque
(value=FF).
’%UN text>’ = Set the Unicode text. See the ^UNI section on page 162 for the
text format.
’%LN<0-240>’ = Set the lines of video being removed. See the ^BLN section on
page 147 for more information.
’%EF’ = Set the text effect.
’%EC’ = Set the text effect color.
’%ML’ = Set the maximum length of a text area.
’%MK’ = Set the input mask of a text area.
’%VL<0-1>’ = Log-On/Log-Off the computer control connection
’%VN’ = Set network connection name.
’%VP’ = Set the network connection password.
Example:
SEND_COMMAND Panel,"'^BMF-500,1,%B10%CFRed%CB Blue
%CTBlack%Ptest.png'"
Sets the button OFF state as well as the Border, Fill Color, Border Color, Text Color, and
Bitmap.
^BMI
Set the button
mask image.
Mask image is used to crop a borderless button to a non-square shape. This is typically
used with a bitmap.
Syntax:
"'^BMI-,,'"Variable: variable text address range = 1 - 4000.button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).mask image = Graphic file used.Example:SEND_COMMAND Panel,"'^BMI-530,1&2,newMac.png'"Sets the button with variable text 530 ON/OFF state mask image to 'newmac.png'.
Variable:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
mask image = Graphic file used.
Example:
SEND_COMMAND Panel,"'^BMI-530,1&2,newMac.png'"
Sets the button with variable text 530 ON/OFF state mask image to 'newmac.png'.