Avaya PARTNER-18D - Manual (Page 67)

6 Maintaining Your System
Backup and Restore 57
Quick Reference Guide
Restore Programming (#125)
Use this feature to reinstate your system and telephone programming (except
the System Day, System Date, and System Time) to the settings saved on a PC
Card at the last system backup (manual or automatic). You should restore the
system settings if your system settings become corrupted, if you make changes
and decide you would rather use the former settings, or if you replace your
processor module and want to retain the system settings you had on the
previous processor module. A successful restore takes about five seconds.
To initiate a restore:
1 If you have a Backup/Restore PC Card installed, skip to Step 2. If you do
not have a PC Card installed, see the PARTNER PC Card Installation
Instructions that came with your PC Card.
2 Press f00ss#125 at extension
10 or 11.
3 Choose the backup file you want to use for the restore:
• 1 MAN.mmddyy, where “mmddyy” represents the date of the manual
backup on this card
• 2 AUTO.mmddyy, where “mmddyy” represents the date of the automatic
backup on this card
When a restore completes successfully, the Restore Complete
message appears for two seconds at idle extensions 10 and 11. Then a
System Reset–Programming Saved (#728) occurs, disconnecting any
calls in progress. You should warn users before beginning a restore, or
do the restore during nonbusiness hours.