Avaya PARTNER-18D - Manual (Page 101)

Centralized Telephone Programming Flow Chart–How to Use
To use the Centralized Telephone Programming Flow Chart, follow these instructions first:
Place the Programming Overlay on the dialpad of the system display phone at extension 10 or 11.
• To Enter Programming Mode:
– Press f 0 0
– Press s s c
– Dial the extension number to be programmed. Buttons on to which lines or pools are assigned
light up to show the current Line Ringing setting: remaining buttons can be programmed with
Auto Dial number or features
• To Program Another Feature at the Same Extension:
– After you program one feature, continue with the instructions in the box for the next feature
• To Change Setting for Another Extension
– Press c
– Dial the new extension’s number
• To Erase a Feature or Auto Dial Button:
– Press the programmed button
– Press !
• To End Programming Mode:
– Press f 0 0
2.0
3.0
= Factory setting
= Button with lights required
= Button with lights recommended
= PARTNER ACS R. 2.0 or later
= PARTNER ACS R. 3.0 or later
✔
Icon Description