Avaya PARTNER-18D - Manual (Page 36)

3 Setting Up Your System
26 Setting the Date, Day, and Time
Quick Reference Guide
Setting the Date, Day, and Time
After supplying power to the control unit, use the following procedures to set the
system clock:
• System Date (#101) to set the month, day, and year
• System Day (#102) to set the day of the week (for Release 2.0 and earlier
systems)
• System Time (#103) to set the hour and minutes
• Automatic Daylight/Standard Times (#126) to automatically update the
system clock
System Date (#101)
Use this feature to set the month, day, and year. The system displays only the
month and day on display telephones when the telephone is idle; the month, day,
and year print on SMDR call reports.
To change the System Date:
1 Press f00ss#101 at extension
10 or 11.
2 Enter today’s date in the form “mmddyy” (month, day, and year), including
leading zeros for single-digit months or days. For example, to enter May 26,
2001, press
042601 .
3 Select another procedure, or exit programming mode.
System Day (#102), Release 2.0 and Earlier
Use this feature to set the day of the week that appears on system display
telephones.
System Day is not applicable to Release 3.0 or later systems. In these
releases, the system calculates the day of the week for you by using
System Date (#101).