Samsung SCH-A670ZSUXAR - Manual (Page 186)

186
Section 13
Data
Use the Data sub menu to set your phone to detect data
connections automatically and to set the speed at which
data is transmitted (baud rate).
1. In standby mode, press the left soft key ( ), then press
(for Setup), (for Call Options), and for
Data . The following options appear in the display:
ⅷ Auto Detect—Set data auto detect capabilities. Options are:
data off, data for next call, and data until powered off.
ⅷ Baud Rate—Set the baud rate for data connections. Options
are: Auto, 19200, 38400, 57600, 115200, and 230400.
2. Use the navigation keys to highlight Auto Detect or
Baud Rate, then press . The selected sub menu
options appear in the display.
3. Use the navigation keys to highlight the desired Auto
Detect or Baud Rate setting, then press .
Call Answer
You can select a specific answer mode when you
receive an incoming call. Your phone can be preset to
answer when you do any of the following:
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup), (for Call Options), and
for Call Answer . The following Call Answer sub
menus appear in the display:
ⅷ Send Key—Press to answer an incoming call.
ⅷ
Folder Open—Open the folder to answer an incoming call.
ⅷ
Any Key—Press any key except to answer an incoming
call.