Samsung ML-2955ND-XAA - Manual (Page 141)

Wireless network setup
51 2. Using a network-connected machine
14 The wireless network connects according to the network
configuration.
15 When the wireless network setting is completed, disconnect
the USB cable between the computer and machine.
16 Follow the instructions on the screen to complete the
installation. After the installation is finished, click Quit or
Restart.
18
Using a network cable
Your machine is a network compatible machine. To enable your
machine to work with your network, you will need to perform some
configuration procedures.
• After completing the wireless network connection, you
need to install a machine driver to print from an
application (See "Installing driver over the network" on
page 17).
• See your network administrator, or the person that set up
your wireless network, for information about your
network configuration.
Items to prepare
• Access point
• Network-connected computer
• Software CD that was provided with your machine
• The machine installed with a wireless network interface
• Network cable
Printing a network configuration report
You can identify the network settings of your machine by printing a
network configuration report.
See "Printing a network configuration report" on page 13.
IP setting using SetIP Program (Windows)
This program is used to manually set the network IP address of your
machine using its MAC address to communicate with the machine.
The MAC address is the hardware serial number of the network
interface and can be found in the Network Configuration Report.
See "Setting IP address" on page 13.