Samsung SC-HMX10C-XAA - Manual (Page 37)

English _ 25
Setting the date and time
Set the date and time when using this HD camcorder for the first time.
1. Touch Menu ( ) tab.
2. Touch Settings ( ) tab.
3. Touch up ( )/down ( ) tab until “Date/Time Set” is displayed.
4. Touch “Date/Time Set.”
5. Touch up ( )/down ( ) tab to set current month, then touch day field.
6. Set values for day, year, hour, minute, and AM/PM as in setting the month.
7. Touch OK (
OK
) tab when the date and time setting is completed.
• The message “Date/Time Changed” appears, the set date/time is applied.
• If you touch the Exit ( ) tab, before the Date/Time is set, the menu
disappears and the Date/Time is not saved, and when touching Return ( )
tab, the message “Date/Time set is not changed” appears.
8. To exit, Return ( ) tab repeatedly until menu disappears.
• On charging the built-in rechargeable battery
Your camcorder has a built-in rechargeable battery to retain the
date, time, and other settings even when the power is off. The built-
in rechargeable battery is always charged while your camcorder is
connected to the wall outlet via the AC power adaptor or while the
battery pack is attached. The rechargeable battery will be fully discharged
in about 6 months if you do not use your camcorder at all. Use your
camcorder after charging the built-in rechargeable battery. If the built-in
rechargeable battery is not charged, any input data will not be backed up
and the date/time appears on the screen as “JAN/01/2007 12:00 AM”
(when “Date/Time” display is set to On).
• You can set the year up to 2037.
Turning the date and time display on/off
To switch the date and time display on or off, access the menu and change the date/time display mode. page 66
STBY 00:00:00 [44Min] 80
Min
Date/Time Set
Date/Time
File No.
LCD Control
1 / 5
OK
Date/Time Set
JAN
12
01
00
2007
AM