Preference features, Software update – Samsung LT27B750NDX-ZA User Manual
Page 86

•
Reset
Reset all setting to factory defaults except for your network settings.
To reset your product to default setting, follow these steps:
1. Go to the
Reset
menu. (
Support
→
Self Diagnosis
→
Reset
)
2. The PIN input screen appears. Enter the PIN using your remote.
3. When done, the PIN screen disappear automatically. The message
All the settings will return to factory defaults.
appears.
4. Select
Yes
. All settings have been reset. The product will turn off and on again automatically. The
Setup
screen
appears. For more information about
Setup
, see user manual.
Software Update
Menu
→
Support
→
Software Update
The
Software Update
menu lets you upgrade your product’s software to the latest version.
Current Version: This is the software version already installed in the product.
Upgrading to the Latest Version
You can upgrade in four ways:
–
By USB
–
Online
–
Alternative Software
–
Standby Mode Upgrade
The four methods are explained in the following pages.
✎
Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically
after completing the software upgrade. When you upgrade software, all video and audio settings you have made
will return to their default settings. We advise you to write down your settings so that you can easily reset them
after the upgrade.
English - 86
English - 87
Preference Features