Getting started – Samsung LT27B750NDX-ZA User Manual
Page 23
4
Software Upgrade
:
Update the software
to the latest version
✎
To update later,
select
Skip
.
When
Network Settings
is complete, your product will check for a new software
version automatically. If new software is available, the product downloads and
installs the new software. When the download is complete, select
Next
.
✎
If you want to upgrade later, select
Skip
. For more information, refer to
Software Update
section of this manual (page 86)
✎
This may take some time, depending on your network status.
✎
You can only upgrade software if your product has an active network
connection.
✎
If no new update software is available, a no new updates message appears
on the screen. Select
OK
.
5
Terms of Service
Agreement
The
Terms of Service Agreement
screen appears.
✎
The screen can take a few seconds to display.
The
General Disclaimer
screen appears. Select
Agree
. The
Privacy Policy
screen
appears. Select
Agree
.
✎
To use
Smart Hub
, you should select
Agree
for the
Terms of Service
Agreement
.
6
Auto Program
(1):
Select where your
product signal comes
from.
Select the appropriate option for your product using your remote, and then select
Next
.
•
I use an aerial cable to connect to TV.
: Select if you have an antenna or a
cable connection without a set-top box. If you select this option, go to 7 -
Auto Program
(2) Step.
•
I use a set-top box.
: Select if you have a satellite or cable set-top box. You do
not need to run
Auto Program
. If you select this option, go to 9 -
Clock
on the
next page.
7
Auto Program
(2):
Select the search
options.
1. Select
Air
or
Cable
using your remote. A check appears on your selection.
When done, select
Next
. You can check both if you have both connected.
2. If you selected
Air
, go to 8 -
Auto Program
(3).
3. If you selected
Cable
, you’ll go to the cable system screen. Select
Digital
Cable System
. The option window appears. Select the correct cable signal
format;
STD
,
HRC
, or
IRC
. Most cable systems use
STD
(Standard). Repeat
the same process with
Analog Cable System
.
4. When done, select
Next
.
Getting Started
English - 22
English - 23