Advanced features – Samsung LT27B750NDX-ZA User Manual
Page 134
Setting up Anynet+ (HDMI-CEC)
•
Anynet+ (HDMI-CEC)
To use the Anynet+ Function,
Anynet+ (HDMI-CEC)
must be set to
On
.
✎
When the
Anynet+ (HDMI-CEC)
function is disabled, all the Anynet+ related operations are deactivated
•
Auto Turn Off
Set an Anynet+ Device to turn off automatically when the TV is turned off.
✎
If the
Auto Turn Off
is set to
Yes
, running external devices will turn off at the same time as the TV powers off.
✎
May not be enabled depending on the device.
•
Receiver
You can listen to sound through a receiver (i.e. Home Theater) instead of the product Speaker.
Switching between Anynet+ Devices
1. Open the
Tools
menu using your remote, and then select
Anynet+ (HDMI-CEC)
.
2. Select
Device List
. The
Device List
screen appears.
✎
If you cannot find a device you want, select
Refresh
to refresh the list.
3. Select a device, and then wait until switch to the selected device.
✎
The
Device List
menu appears only when you set
Anynet+ (HDMI-CEC)
to
On
in the
System
menu.
✎
Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while
switching is in progress.
✎
If you have selected an Anynet+ device using
Source
function and then selecting its input source, you cannot
use the Anynet+ function. Make sure to switch to an Anynet+ device by using the
Device List
.
Listening through a Receiver
You can listen to sound through a receiver (i.e. Home Theater) instead of the product Speaker. To listen to sound through
a receiver, go to
Receiver
screen (
System
→
Anynet+ (HDMI-CEC)
→
Receiver
). Then select
Receiver
and set to
On
.
✎
If your receiver supports audio only, it may not appear in the device list.
✎
The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL) port of the product.
✎
When the receiver (i.e. Home Theater) is set to On, you can hear sound output from the product’s Optical jack.
When the product is displaying a DTV (air) signal, the product will send out 5.1 channel sound to the receiver.
When the source is a digital component such as a DVD player and it is connected to the product via HDMI, you
will hear only 2 channel sound from the receiver.
English - 134
English - 135
Advanced Features