Samsung LT27B750NDX-ZA - Manual (Page 60)

SPDIF Output
Menu → Sound → SPDIF Output
SPDIF (Sony Philips Digital Interface) provides digital audio output to speakers and various digital devices such as A/V
Receivers and Home Theaters which reduces interference and distortion.
• Audio Format
You can select the Digital Audio output (SPDIF) format. The available Digital Audio output (SPDIF) format may differ
depending on the input source.
• Audio Delay
Lets you correct timing mismatches between the audio track and the video when you are watching the TV and
listening to digital audio output from the product through an external device such as an AV receiver. When you select
the
Audio Delay , a slider screen appears. Adjust the option value using your remote (0ms ~ 250ms).
Speaker Settings
Menu → Sound → Speaker Settings
• Speaker Select
If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound
echo caused by the difference in decoding speed between the product’s speakers and the speakers attached to
your audio receiver. If this occurs, set the product to
External Speaker .
✎ When the Speaker Select is set to External Speaker , the product’s speakers are turned off. You will hear
sound through the external speakers only. When the Speaker Select is set to TV Speaker , both the product’s
speakers and the external speakers are on. You will hear sound through both.
✎ When the Speaker Select is set to External Speaker , the volume buttons and mute function will not operate
and the sound settings will be limited.
✎ If there is no video signal, both the product’s speakers and the external speakers will be mute.
• Auto Volume
Because each station has its own broadcasting conditions, the volume may fluctuate each time you change
the channel. This feature automatically adjusts the volume of a channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.
✎ To use the volume control of a connected source device, set Auto Volume to Off . A change to the volume
control of the connected source device may not be applied if Auto Volume is set to Normal or Night .
Reset Sound
Menu → Sound → Reset Sound
Reset all sound settings to the factory defaults.
English - 60 English - PB
Basic Features for the TV