Samsung LT27B750NDX-ZA - Manual (Page 71)

Managing the Network Connected Devices
Wi-Fi Direct
Menu → Network → Wi-Fi Direct
Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with
your product directly without a router.
✎ To use this function, your mobile device should be supported by the Wi-Fi Direct .
To connect your mobile device with your product using Wi-Fi Direct, follow these steps:
1. Go to Wi-Fi Direct screen ( Network → Wi-Fi Direct ). The product starts to search devices.
2. Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device.
– PBC : Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. Your product automatically
acquires all the network setting values it needs and connects to your network.
– PIN : Input the displayed PIN on your device.
✎ If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnect .
Soft AP
Menu → Network → Soft AP
Using this function, you can connect the product on your mobile devices if your mobile devices do not support Wi-Fi
Direct . Set the options for connection of Wi-Fi device.
• Soft AP
Turns on or off the Soft AP . When Soft AP is set to On , your mobile devices can find the product name in Wi-Fi
connection list.
• Security key
Set the Security key manually using the remote control.
– If the security key does not meet the required digit number, Done is not available.
– Input the generated security key into the device you want to connect.
– If network does not operate normally, check the security key again. An incorrect security key may cause a
malfunction.
English - 70 English - 71
Network Features