Samsung SPH-M520ZSAQST - Manual (Page 158)

132 Section 2H: Using Your Phone’s Voice Services
Tips for adapting Digit Dial:
ⅷ Adapt digits in a quiet place.
ⅷ Make sure you wait for the beep before starting to speak.
ⅷ Speak clearly, but say each digit sequence naturally.
ⅷ If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, you can say or select
“No” when the prompt asks, “Did the recording sound OK?” You
will then be prompted to rerecord the sequence.
To adapt Digit Dial to your voice:
1. Select Menu > Tools > Voice Services.
2. Select Settings ( ).
3. Select Digit Dialing and press .
4. Select Adapt Digits and press .
5. Select OK ( ) to begin the process. (The phone displays the first
digit sequence.)
6. Wait for the beep, and then repeat the digits using a normal tone of
voice. (The phone plays back your the first set of digits and asks
“Did the recording sound OK?”)
Ⅲ If the recording is acceptable (no mistakes and no background
noises), say “Yes” or press
.
Ⅲ If you need to rerecord the digits to fix any problems, say “No”
or press
. (The phone then prompts you to say the digits
again.) Wait for the beep, and then record the digits again.
(Repeat this step until you are satisfied with the recording.)
7. After confirming that the recording is acceptable, repeat the
recording process with the next set of digits.
8. Repeat steps 6 and 7 for an additional nine sets of digits.
9. When you are finished with a full session, you will reach a screen
that reads, “Adaptation Complete.” You can either allow the screen
to time out or press OK (
) to return to the main standby screen.