Samsung HW-H750-ZA - Manual (Page 35)

35
ENG
MULTIROOM LINK
4. Wait until the pairing indicator on the Soundbar stops flashing. If the Soundbar's LED
indicator turns solid blue, pairing is complete. The Soundbar may also beep.
● Place each Soundbar at least 20 inches (50 cm) from the HUB when connecting
them to the HUB.
● Your smart device cannot connect to the Soundbar or the HUB if there is no
wireless router.
● To confirm you have a proper connection, check the pairing indicator on the front
of the HUB.
- When you turn on the HUB for the first time, there is a 20 minute pairing
period. The pairing indicator ( ) will blink for these 20 minutes or until
pairing occurs. When you press the SPK ADD button to pair additional
Soundbar's, the pairing period is reduced to 10 minutes.
The pairing indicator (
) flashes for 10 minutes or until pairing occurs.
Turn on the Soundbar you want to pair while the pairing indicator is flashing.
- If pairing mode has expired, press the SPK ADD button on the rear of the HUB
to turn on pairing mode again. Then, turn the Soundbar off and then on or
press the SPK ADD button on the rear of the Soundbar to link the Soundbar
to the HUB.
● For a proper connection, connect the HUB to your router before turning on the
Soundbar.
- Connecting the Soundbar to the HUB may take a few minutes.
- There will be a brief sound when the connection is established.